What an Ultrasonic Jewelry Cleaner Actually Does to Grimy Rings

An ultrasonic jewelry cleaner uses sound waves and water to lift grime from the crevices a wipe can’t reach. Here’s how it works and whether you need special solution.

How Does an Ultrasonic Jewelry Cleaner Work?

Disclaimer: This post contains affiliate links. For more information, see my disclosures here. As an Amazon associate, we earn from qualifying purchases.

An ultrasonic jewelry cleaner gets into the tiny crevices of a ring that a cloth and a quick rinse always miss. You add water, drop the piece in, and press a button. Sound waves create tiny bubbles that lift away the oils, lotion, and grime built up around the stones and settings, and a few minutes later everything looks bright again.

You fill the tank with water, place your jewelry inside, and press the button. The cleaner sends high-frequency sound waves through the water, which create countless tiny bubbles. As those bubbles form and collapse against the surface, they gently lift dirt and buildup, including from the small crevices around stones and clasps. It runs for a few minutes and shuts off, and it works on more than rings. Glasses, coins, and other small items clean up too.

What It Is (And Why You Need It)

This is the JeaTone ultrasonic jewelry cleaner, a small countertop tank that deep-cleans jewelry and other small items using sound waves and water. The appeal is reaching the spots a toothbrush and a rinse simply can’t. Jewelry collects more than you’d think. The CDC notes that some studies have found the skin under rings holds more germs than bare skin, and day-to-day oils, soap, and lotion build up in the crevices a quick wipe never reaches. Getting into those gaps is exactly what an ultrasonic cleaner is built for.

Why We Love it

• It cleans the crevices around stones and settings that you can’t reach by hand.
• It works in minutes with the press of a button.
• Plain water is often all you need, so it’s cheap to run.
• It cleans more than jewelry, including glasses and coins.
• It’s gentle, since the bubbles do the work instead of scrubbing.
• It brings dull, grimy pieces back to bright.

Pros and Cons

Pros:

• Reaches crevices a wipe misses.
• Fast, hands-off cleaning.
• Works with just water for most jobs.
• Cleans glasses, coins, and small items too.
• Gentle, no hard scrubbing.

Cons:

• It’s not right for every gem. Soft or porous stones like pearls, opals, and emeralds, or anything with glued settings, should stay out, so check before you clean a piece.
• The tank is sized for small items, so big pieces may not fit.
• You’ll empty and refill the water between rounds of dirty items.
• A “special solution” is sold for it, but water or water with a drop of dish soap is usually plenty.

Bonus Tips… What you didn’t see in the reel 👀

View this reel on Instagram

1. Start with plain water, and add only a drop of dish soap if a piece is extra greasy. You rarely need a fancy solution.
2. Skip soft or porous stones like pearls, opals, and emeralds, since the vibration can damage them.
3. Check that settings are secure first, since loose or glued stones shouldn’t go in.
4. Run a second short cycle for very dirty pieces instead of one long one.
5. Pat pieces dry with a soft cloth after, so they finish spot-free and bright.

Where To Get it

You can get the ultrasonic jewelry cleaner on Amazon, where it usually ships with Prime. Check the current price on Amazon before you buy.

Frequently Asked Questions

If your everyday rings have gone dull and a wipe isn’t cutting it, this little cleaner gets into the spots you can’t. Pin this review so it’s easy to find when your jewelry needs a refresh.

Want to save this to remember later? Make sure to pin the image below!